Steps for changing tires on a loader:
1. Find a safe and stable place, park the loader on a flat ground, hang the handbrake, loosen the wheel pin and open the front cover of the machine.
2. Select the appropriate tools (such as wrench, air gun, etc.), remove the nuts and fixings of the old tire, remove the old tire and remove the residue, and clean the surface of the wheel hub.
3. According to the specifications and requirements of the new tire, make an accurate matching selection, place the new tire on the hub, and fix them together with a certain method (such as nuts, fastening belts, etc.).
4. Inflate the new tire to the correct air pressure using the inflation equipment using the correct pressure, temperature and time. Also check that the valves of the tires are installed correctly.
5. After installing the new tire, check that the tire is in the correct position and that the fixings are secure. Then reinstall the wheel pins and the front cover of the machine in order, closing all parts.
6. Carry out a simple test run to check whether the tires rotate evenly without eccentricity, whether the running is smooth and there is no abnormal noise, and perform some simple operations to check whether the installation is correct.
Matters needing attention when changing tires on loaders:
1. Pay attention to safety, choose a stable site for replacement, and pay attention to avoid interference from other workers and vehicles.
2. When loading and unloading tires, try to use professional tools and equipment to prevent unnecessary injuries or losses.
3. When choosing a new tire, it should be accurately matched according to the specification requirements and actual needs, so as to avoid potential safety hazards caused by inconsistent sizes.
4. After the replacement, a full inspection should be carried out, including air pressure, fixing parts, etc., to ensure that the tire is firmly installed and reduce the incidence of failure.
5. During the test run, the performance and operation of the tire should be carefully observed, and the existing problems should be found and solved in time.
Post time: Jul-08-2023